How do I fix Wyze Cam OG yellow light?

Start by restarting your device, checking connections, and updating firmware. Our step-by-step guide provides detailed instructions.

When should I call support for my Wyze Cam OG?

If troubleshooting doesn't resolve the issue, or you encounter persistent errors, contact a certified Wyze technician.

Wyze Cam OG Yellow Light

Q: Why is my Wyze Cam OG yellow light?

Common causes include software issues, connectivity problems, and settings misconfigurations. Follow our guide to fix your Wyze Cam OG.

Is your Wyze Cam OG yellow light staying solid or blinking unexpectedly? A yellow or amber LED on your Wyze Cam OG typically indicates a power, connectivity, or firmware issue rather than normal operation. Unlike the standard blue light that shows your camera is connected and functioning, the yellow light means your camera needs attention. This guide walks you through proven troubleshooting steps to diagnose and resolve the Wyze Cam OG yellow light problem, restoring your camera to full working condition.

What the Wyze Cam OG Yellow Light Means

The status LED on your Wyze Cam OG communicates important information about your device's state. Understanding what the yellow light pattern indicates helps you target the right fix:

Solid yellow: Camera is powered but not connecting to Wi-Fi, or firmware update is in progress
Blinking yellow: Camera is in pairing/setup mode, or experiencing a boot loop
Yellow then dark: Possible power supply insufficiency or hardware fault

Most Wyze Cam OG yellow light issues stem from power problems, network connectivity failures, or corrupted firmware. The steps below address each cause systematically.

Step-by-Step Troubleshooting

Check Your Power Supply: The Wyze Cam OG requires a 5V/1A power adapter. Using an insufficient power source is the most common cause of a persistent yellow light. Verify you're using the original Wyze adapter and cable. Try a different USB cable and wall outlet. If you're using a USB port on a router or computer, switch to a dedicated wall adapter instead.

Power Cycle the Camera: Unplug your Wyze Cam OG from power completely. Wait a full 30 seconds for capacitors to discharge. Plug it back in and watch the LED sequence. The light should briefly show yellow, then transition to flashing blue, then solid blue within 60 seconds. If it remains yellow after 2 minutes, proceed to the next step.

Verify Wi-Fi Network Compatibility: The Wyze Cam OG only connects to 2.4GHz Wi-Fi networks. A yellow light often appears when the camera cannot find or authenticate with your network. Confirm your router broadcasts a 2.4GHz band (not 5GHz-only). Check that your Wi-Fi password hasn't changed. Temporarily disable WPA3 or enterprise security settings, as the Cam OG works best with WPA2-Personal.

Perform a Factory Reset: If the Wyze Cam OG yellow light persists, reset the device to clear any corrupted settings. Press and hold the setup button on the camera's underside for 10 seconds until you hear "Ready to connect." Release the button. The LED will flash yellow, indicating factory reset mode. Set up the camera fresh in the Wyze app.

Reflash Firmware via SD Card: For stubborn firmware corruption causing the yellow light, manual reinstallation often resolves it. Download the latest Wyze Cam OG firmware from Wyze's official support site to a microSD card (FAT32 formatted, 32GB or smaller). Rename the file to "demo.bin," insert the card while the camera is unplugged, hold the setup button, then plug in power. Continue holding for 3-5 seconds until the LED turns purple, then release.

Test on a Different Network: If possible, set up your Wyze Cam OG on a mobile hotspot or different Wi-Fi network. This isolates whether the issue is network-specific or hardware-related. If the camera connects successfully elsewhere, your router settings—such as MAC filtering, firewall rules, or channel width—may need adjustment.

⚠️ Important: Do not unplug your Wyze Cam OG during a firmware update. Interrupting the process can brick the device and permanently damage the bootloader. If your camera shows a solid yellow light for more than 10 minutes during an update, wait at least 15 additional minutes before attempting any intervention.

Preventing Future Yellow Light Issues

To avoid recurring Wyze Cam OG yellow light problems, maintain stable power with the original adapter, position your camera within strong Wi-Fi range (check signal strength in the Wyze app), and keep firmware updated through the app rather than skipping updates. Avoid frequent power interruptions, and use a UPS battery backup if your area experiences regular outages.

Frequently Asked Questions

Why is my Wyze Cam OG yellow light blinking after setup?

A blinking yellow light after successful setup usually means the camera lost its Wi-Fi connection. Check if your router restarted, if the 2.4GHz band is still active, or if the camera moved out of range. Re-run setup in the Wyze app if the issue persists.

Can a weak Wi-Fi signal cause the Wyze Cam OG yellow light?

Yes. Insufficient signal strength prevents the camera from maintaining its connection, causing the LED to show yellow as it attempts to reconnect. Move your camera closer to your router or add a Wi-Fi extender dedicated to 2.4GHz devices.

How long should the yellow light appear during normal startup?

During normal boot, the yellow light appears for 10-30 seconds before transitioning to flashing blue, then solid blue. If your Wyze Cam OG yellow light remains for more than 2 minutes, the camera has encountered an error requiring troubleshooting.

Still Need Help With Your Wyze Device?

If these steps didn't resolve the yellow light issue, our certified technicians can help.

Get Free Support Now →